JVC KD-X360BTS Manuel D'instructions page 18

SiriusXM® Radio
(for KD-X360BTS)
TuneScan™
You can get a short preview of the songs that you have missed on each of
your SmartFavorites music channels or a music channel currently tuned into.
1
Press .
2
Turn the volume knob to select TUNE SCAN, then press the knob.
Scanning start for the first 6 seconds of the recorded music contents.
• To listen to the current song, press the volume knob to stop scanning. The
unit continues playing the current song.
• To select the previous/next song, press S / T.
• To cancel scanning, press and hold the volume knob. Playback returns to
the channel before you entered TuneScan.
SiriusXM settings
1
Press and hold .
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
[SIRIUS XM]
[CHANNEL LOCK] To unlock settings:
1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press the volume knob to confirm.
14
ENGLISH
[CODE SET]
[LOCK SETTING]
[CHANNEL EDIT]*1
[CHANNEL CLEAR]*1
[TUNE START]*2
[SIGNAL LEVEL]
.
[BUFFER USAGE]
Default: [XX]
[SXM RESET]
*1 Displayed only when [LOCK SETTING] is set to [USER DEFINED].
*2 Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later which supports
1 Press the volume knob to enter [NEW CODE].
2 Turn the volume knob to select a number.
3 Press S / T to move to the entry position.
4 Repeat steps 2 and 3 to enter a new 4-digit pass code.
5 Press the volume knob to confirm.
6 Repeat steps 2 to 5 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings for
next time.
[MATURE CH]: Selects the SiriusXM-defined lock setting. ;
[USER DEFINED]: Selects the individual channels the user wants to
lock. ; [OFF]: Cancels.
1 Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then
press the knob.
"L" appears in front of the channel number.
3 Press and hold
[YES]: Clears all the locked channels. ; [NO]: Cancels.
[ON]: All qualified music channels in the SmartFavorites will start
playback from the beginning of the song. ; [OFF]: Cancels.
Shows the strength ([NO SIGNAL]/[WEAK]/[GOOD]/[STRONG]) of
the current received signal.
Shows the memory usage ([0%] to [100%]) for Replay buffer.
[YES]: Resets all SiriusXM settings to default. ; [NO]: Cancels.
SmartFavorites.
to exit.