JVC KD-X360BTS Manuel D'instructions page 12

USB/iPod/ANDROID
Select music drive
While in USB source, press 5 MODE repeatedly.
Stored songs in the following drive will be played back.
• Selected internal or external memory of a smartphone (Mass Storage
Class).
• Selected drive of a multiple drive device.
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver's
operations from the following devices.
KD-X360BTS: iPhone/iPod (via Bluetooth or via USB input
terminal) or Android smartphone (via Bluetooth)
KD-X260BT/KD-SX25BT: Android smartphone (via Bluetooth)
Preparation:
• Install the latest version of JVC Remote application on your device before
connecting.
• For more information, visit <http://www.jvc.net/cs/car/>.
You can make the settings in the same way as connection via Bluetooth.
(Page 22)
Select control mode
While in iPod USB source (or iPod BT source), press 5 MODE repeatedly.
Control iPod from this unit.
[HEAD MODE]:
[IPHONE MODE]: Control iPod using the iPod itself. However, you can still
perform play/pause, file skip, fast-forward or fast-reverse from
this unit.
8
ENGLISH
Select a file from a folder/list
For iPod, applicable only when [HEAD MODE] is selected.
1
Press .
2
Turn the volume knob to select a folder/list, then press the knob.
3
Turn the volume knob to select a file, then press the knob.
Quick search
(applicable only for USB source)
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.
Alphabet search
(applicable only for iPod USB source or iPod BT source)
You can search for a file according to the first character.
Press 2 J / 1 K or turn the volume knob quickly to select the desired
character (A to Z, 0 to 9, OTHERS).
• Select "OTHERS" if the first character is other than A to Z, 0 to 9.
• To return to the previous setting item, press
• To cancel, press and hold
.
.