Connecting Other Audio Components; Connecting To The Front Panel Audio - Pioneer VSX-519V Mode D'emploi

03 Connecting up
Connecting other audio
components
The number and kind of connections depends
on the kind of component you're connecting.
Follow the steps below to connect a CD-R, MD,
DAT, tape recorder or other audio component.
This receiver
HDMI
BD/DVD
IN
IN
COAXIAL COAXIAL
TV/SAT
IN
IN IN 1 2
(CD) (CD)
OPTICAL OPTICAL
IN 2
(DVR/VCR)
OUT
IN 1 IN 1
(CD-R/TAPE) (CD-R/TAPE)
DIGITAL DIGITAL
1
OPTICAL COAXIAL
DIGITAL OUT
CD-R, MD, DAT, Tape recorder, etc.
Note
1 Note that you must connect digital components to analog audio jacks if you want to record to/from digital components (like
an MD) to/from analog components.
14
En
AUDIO AUDIO
OUT OUT CD-R/TAPE CD-R/TAPE IN IN CD IN
L L
R R
DVR/VCR IN TV/SAT IN
IR OUT
L
ASSIGNABLE
R
SURROUND CENTER FRONT
L
R
BD/DVD IN
ASSIGNABLE SUBWOOFER
1 - 2 BD/DVD MULTI CH IN
3 2
IN
R L R
REC
AUDIO IN AUDIO OUT
1 If your component has a digital output,
connect this to a digital input on the receiver.
The example shows an optical connection to
the DIGITAL OPTICAL IN 1 (CD-R/TAPE)
input.
1
2 If necessary, connect the analog audio
outputs of the component to a set of spare
audio inputs on this receiver.
You'll need to make this connection for
components without a digital output, or if you
want to record from a digital component. Use a
stereo RCA phono cable as shown.
3 If you're connecting a recorder, connect
the analog audio outputs to the analog audio
inputs on the recorder.
The example shows an analog connection to
MO
the CD-R/TAPE analog output jack using a
ANTENNA
stereo RCA phono cable.
AM
LOOP
Connecting to the front panel
C
audio mini jack
Front audio connections are accessed via the
front panel using the INPUT SELECTOR or
PORTABLE button on the remote control. Use
a stereo mini-jack cable to connect a digital
OUT
L
audio player, etc.
PLAY
MULTI-ZONE
CONTROL
+
PRESET ENTER
ON/OFF
PORTABLE
AUDIO OUT
Digital audio player, etc.
MASTER
VOLUME