Pioneer VSX-519V Mode D'emploi page 26

04 Controls and displays
STEREO/A.L.C.
Switches between stereo playback, Auto
level control stereo mode (page 29) and
Front Stage Surround Advance modes
(page 30).
STANDARD
Press for Standard decoding and to switch
between 2 Pro Logic II options (page 28).
ADV SURR
Switches between the various surround
modes (page 29).
8 System Setup and Component control
buttons
The following button controls can be accessed
after you have selected the corresponding
MULTI CONTROL button (BD, TV, etc.).
Press RECEIVER first to access:
AUDIO PARAMETER
Use to access the Audio options (page 32).
SETUP
Press to access the System Setup menu
(page 35).
RETURN
Confirm and exit the current menu screen.
Press BD or DVR first to access:
TOP MENU
Displays the disc 'top' menu of a BD/DVD.
HOME MENU
Displays the HOME MENU screen.
RETURN
Confirm and exit the current menu screen.
MENU
Displays the TOOLS menu of Blu-ray Disc
player.
Press TUNER first to access:
T.EDIT
Memorizes/names stations for recall
(page 40, 41).
Note
1 The tone controls are disabled when the listening mode is set to DIRECT or PURE DIRECT.
26
En
BAND
Switches between AM, FM ST (stereo) and
FM MONO radio bands (page 40).
 (TUNE /, PRESET /),
9
ENTER
Use the arrow buttons when setting up your
surround sound system (page 35). Also used to
control BD/DVD menus/options.
Use the TUNE / buttons can be used to
find radio frequencies (page 40) and the
PRESET / buttons can be used to select
preset radio stations (page 41).
10 Component control buttons
The main buttons ( ,

control a component after you have selected it
using the input source buttons.
The controls above these buttons can be
accessed after you have have selected the
corresponding input source button (for
example BD, DVR or TV). These buttons also
function as described below.
Press RECEIVER first to access:
BASS –/+
Use to adjust Bass
TRE –/+
Use to adjust Treble
Press TV first to access:
ANT
Use to select the VHF/UHF antennas or
Cable TV.
11 Number buttons and other component
controls
Use the number buttons to directly select the
tracks on a CD, DVD, etc. There are other
buttons that can be accessed after the
RECEIVER button is pressed. (For example
TEST TONE, etc.)
HDD*, DVD*, VCR*
These buttons switch between the hard
disk, DVD and VCR controls for HDD/DVD/
VCR recorders.
, etc.) are used to

1
1