Display - Pioneer VSX-519V Mode D'emploi

Controls and displays

Display

1
10
1 PHASE
Lights when the Phase Control is switched on
(page 31).
2 AUTO
Lights when the Auto Surround feature is
switched on (See Auto playback on page 28).
3 ST
Lights when a stereo FM broadcast is being
received in auto stereo mode.
4 TUNE
Lights when a broadcast is being received.
5 ZONE
Lights when the MULTI-ZONE feature is active
(page 38).
6 Speaker indicator
Shows if the speaker system is on or not
(page 34).
A means the speakers are switched on.
SP

means the speakers are switched off and
SP

sound is output from the headphone jack.
7 Sleep timer indicator
Lights when the receiver is in sleep mode
(page 27).
8 Tuner preset indicators
PRESET
Shows when a preset radio station is
registered or called.
MEM
Blinks when a radio station is registered.
2
11
3 4 5 6
12 13
9 PRESET information or input signal
indicator
Shows the preset number of the tuner or the
input signal type etc.
10 DTS indicators
DTS
Lights when a source with DTS encoded
audio signals is detected.
96/24
Lights when a source with DTS 96/24
encoded audio signals is detected.
11 Character display
Displays various system information.
12 Dolby Digital indicators
2
Lights when a Dolby Digital encoded signal
is detected.
2PLll
Lights to indicate Pro Logic II decoding
(see Listening in surround sound on
page 28 for more on this).
13 ADV.S.
Lights when one of the Advanced Surround
modes has been selected (See Using the
Advanced surround effects on page 29 for more
on this).
7 8 9
14 15 14 16
04
23
En