Display - Pioneer VSX-519V-S Mode D'emploi

Controls and displays

Display

1
11
1 PHASE
Lights when the Phase Control is switched on
(page 29).
2 AUTO
Lights when the Auto Surround feature is
switched on (See Auto playback on page 26).
3 RDS
Lights when an RDS broadcast is received
(page 40).
4 ST
Lights when a stereo FM broadcast is being
received in auto stereo mode.
5 TUNE
Lights when a broadcast is being received.
6 ZONE
Lights when the MULTI-ZONE feature is active
(page 36).
7 Speaker indicator
Shows if the speaker system is on or not
(page 32).
SP A means the speakers are switched on.

SP
means the speakers are switched off and

sound is output from the headphone jack.
8 Sleep timer indicator
Lights when the receiver is in sleep mode
(page 25).
2 3
12
4 5 6 7
13 14
9 Tuner preset indicators
PRESET
Shows when a preset radio station is
registered or called.
MEM
Blinks when a radio station is registered.
10 PRESET information or input signal
indicator
Shows the preset number of the tuner or the
input signal type, etc.
11 DTS indicators
DTS
Lights when a source with DTS encoded
audio signals is detected.
96/24
Lights when a source with DTS 96/24
encoded audio signals is detected.
12 Character display
Displays various system information.
13 Dolby Digital indicators
2
Lights when a Dolby Digital encoded signal
is detected.
2PLll
Lights to indicate Pro Logic II decoding
(see Listening in surround sound on
page 26 for more on this).
8 9 10
15 16 15 17
04
21
En