Ropex RESISTRON RES-5027 Notice D'utilisation page 6

DECLARATION OF CONFORMITY
We hereby declare that the following device has been developed and manufactured in conformance with the direc-
tives cited below:
Designation:
Type:
Operating principle:
Compliant with following standards and directives:
EN 61010-1
2014/35/EU
2014/30/EU
2011/65/EU
Note:
This declaration of conformity certifies that the device/electronic itself complies with the above-mentioned direc-
tives. The CE mark on the device/electronic does not relieve the machinery manufacturer of his duty to verify the
conformity of the completely installed, wired and operationally ready system in the machine with the EMC directive.
Comments:
RESISTRON/CIRUS temperature controllers are not independently operable devices. They are used by the
machinery manufacturer to form a sealing system by adding EMC-relevant components such as filters, transfor-
mers, heatsealing bands and wiring. The final configuration may vary significantly in terms of performance and
physical dimensions. All information provided by us in connection with the line filter is merely intended as a guide
and is based on a typical measuring setup. It serves to demonstrate that compliance with the EMC directive can
be achieved by using a line filter that is suitable for the overall system. The line filter and current transformer must,
however, be determined on the basis of the respective application. We also wish to point out that the transformer
which is used must be designed in accordance with VDE 0551/EN 61558 or UL 5058 for safety reasons.
July 12, 2020
ROPEX Industrie-Elektronik GmbH
Adolf-Heim-Str. 4
74321 Bietigheim-Bissingen (Germany)
Page 6
RESISTRON temperature controller with accessories
RES-5027 with line filter and current transformer
Impulse sealing of films and plastics
Safety requirements for electrical equipment, control, and laboratory use
low voltage directive
electromagnetic compatibility directive
RoHS directive
J. Kühner (CEO)
RES-5027
Informations générales
Version 1