Operating Panel; Dishwasher Interior Components; Info Button; Time Setting - Gaggenau DF480 Notice D'utilisation

en-us
Getting Started
The numbers stated below refer to the overview images
on the previous page of this manual.

Operating panel

(
On/Off button
0
Wash cycles**
8

Info button (

@
Digital display
H
Rinse aid refill indicator
P
Salt refill indicator
X
Selection buttons
`
Delay start button
h
Wash cycle options**
)"
START button
)*
< > button
Note: Some of the wash cycles and options will vary by
model.

Dishwasher interior components

1" Interior light *
1* Third rack*
12 Upper rack
1: Upper spray arm
1B Detergent tab tray
1J Lower spray arm
1R Dispenser for special salt
1Z Filters
1b Silverware basket *
1j Lower rack
9" Rinse aid dispenser
9* Detergent dispenser
92 Lock for detergent dispenser
9: Rating plate
* optional feature which may or may not be included with
your dishwasher.
12
Info button (
T he Info button ( can be used to display additional wash
I n f o b u t t o n
cycle information.
1. Press the Info button (8.
2.
Press the wash cycle button.
Information on the selected wash cycle is indicated
on the display window at the top @.
3. To leave, press Info button ( 8.

Time setting

W hen the appliance is switched on for the first time, the
T i m e s e t t i n g
time starts at 12:00 o'clock.
Set the time as follows:
1.
Open the door.
Switch on ON/OFF switch (.
2.
Press Info button ( 8 for 3 seconds until the
3.
following text is indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with t 3 sec.
Keep pressing button > )* until the time setting is
4.
indicated on the display window at the top @.
5. Make the setting with setting buttons + - X. If the
selection buttons + - X are held down, the set
values are changed in 10-minute increments.
Press and hold the Info button (8 for 3 seconds.
6.
The selected setting has now been stored.
Note: If the appliance was disconnected from the power
supply for a prolonged period, the time starts at 12:00
o'clock. Set the time.