Transporting The Appliance; Securing The Appliance Against Frost - Gaggenau DF480 Notice D'utilisation

en-us
Installation and connection

Transporting the appliance

Empty the dishwasher and secure loose parts.
Drain the appliance according to the following steps:
1.
Turn on the tap.
2.
Open the door.
3. Switch on ON/OFF button (.
4.
Select wash cycle with the highest temperature.
The estimated wash cycle duration is indicated on
the digital display @.
Press START button )".
5.
6.
Close the door.
Wash cycle sequence starts.
7.
Open the door after approx. 4 minutes.
8. Press START button )" until "Program was
terminated"/"Ready in one minute." is indicated at
the digital display @.
9.
Close the door.
10.
Open the door after approx. 1 minute.
The digital display @ indicates; "Finished".
11. Switch off ON/OFF switch (.
12.
Turn off the tap, disconnect supply hose and drain
water.
Note: Transport appliance upright only. This prevents
residual water from running into the machine control
and damaging the wash cycle sequence.

Securing the appliance against frost

If the appliance is in a room where there is a risk of frost
(e.g. holiday home), empty the appliance completely
(see "Transporting the appliance").
54