Remaining Time Projection; Infolight; Changing Start Wash Cycle; Tone Volume - Gaggenau DF480 Notice D'utilisation

Remaining time projection

(Optical display while the wash cycle is
running) *
W hile wash cycle is running, an optical display
R e m a i n i n g t i m e p r o j e c t i o n
(additional cycle information) is indicated on the floor
under the appliance door. If the base panel is pulled
forwards or if the appliance is installed at eye-level with
flush furniture front, the display is not visible.
You can switch the optical display on or off.
* optional feature which may or may not be included with
your dishwasher.

Infolight *

W hile the wash cycle is running, a light spot shines
i n f o L i g h t
on the floor under the appliance door. Do not open the
appliance door until the light point is no longer visible
on the floor. If the appliance door is not completely
closed, the light spot flashes *. If the appliance
is installed at eye-level, with flush furniture front,
the light point is not visible. You can switch the Infolight
on or off.
In darkened rooms, some light scattering may be visible.
This is normal and cannot be changed.
* optional feature which may or may not be included with
your dishwasher.
Operating the Dishwasher

Changing start wash cycle

You can change the "Start wash cycle" setting.

Tone volume

The end of the wash cycle is indicated by a buzzer. You
can also change this setting.

Button volume

When you are operating the dishwasher, a signal
sounds whenever a button is pressed. You can control
the volume of the signal. If you do not like the button
volume, you can switch it off.

Child-proof lock *

T he dishwasher features an electronic child-proof lock.
C h i l d - p r o o f l o c k
The child-proof lock protects children from potential
hazards which the dishwasher poses.
You can switch the child-proof lock on or off. When the
child-proof lock is on, it is difficult to open the door.
* optional feature which may or may not be included with
your dishwasher.
en-us
35