Operating The Unit - Gaggenau DF 260 Notice D'utilisation

Operating the Unit

Switching on the appliance
• Open the door.
• Turn unit on by pressing the ON/OFF switch. The display of the last
selected program lashes.
• The expected program duration lashes on the digital display.
• Press the START button.
• Close the door. The program starts running.
Interrupting the cycle
• Open the door.
• Press the ON/OFF button. The LEDs go out. The program is saved. If the door
was opened on an appliance which has a warm water connection or is heated,
irst leave the door ajar for several minutes and then close. Otherwise, expansion
(pressure) may cause the appliance door to spring open or water to run out of
the appliance.
• To continue the program, switch on the ON/OFF switch again.
• Close the door.
WARNING
To avoid risk of scalding, OPEN THE DOOR CAREFULLY during any wash or rinse cycle. Do not fully open
the door until water noises have stopped.
Terminating the program
• Open the door.
• Press START button for approx 3 sec.until 0:01 is displayed .
• Close the door. The program sequence lasts approx. 1 min.
• The display will indicate 0:00
• Open the door.
• Press the ON/OFF button.
• Close the door.
Child-proof lock * (select models)
The Child Safety Lock is designed to prevent children from opening the
dishwasher.
• To lock the door, push the slider below the door grip to the right.
• To unlock the door, push the slider to the left.
16