Proper Use; Technical Data - EINHELL GE-EH 6560 Instructions D'origine

3. Proper use

Important. This hedge trimmer is suitable for cut-
ting hedges, bushes and shrubs.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

GE-EH 6560
Mains voltage ..........................220-240 V~ 50 Hz
Power input ............................................... 650 W
Idling speed .......................................1,500 min
Cutting length ......................................... 600 mm
Cutter rail length ..................................... 660 mm
Tooth spacing ........................................... 30 mm
Max. cutting thickness .............................. 18 mm
Cuts/min ...................................................... 3000
Protection class ............................................ II/
Weight ......................................................3,75 kg
GE-EH 7067
Mains voltage ..........................220-240 V~ 50 Hz
Power input ............................................... 700 W
Idling speed .......................................1,500 min
Cutting length ......................................... 670 mm
Cutter rail length ..................................... 710 mm
Tooth spacing ........................................... 30 mm
Max. cutting thickness .............................. 18 mm
Cuts/min ...................................................... 3000
Protection class ............................................ II/
Weight ........................................................3,8 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
GE_EH_6560_7067_SPK7.indb 16 GE_EH_6560_7067_SPK7.indb 16
GB
L sound pressure level ..................... 82.2 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ..................... 95.36 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
-1
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
-1
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Damage to hearing if no suitable ear protec-
tion is used.
2. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
- 16 -
= 3.106 m/s
2
h
2
16.09.2016 10:40:39 16.09.2016 10:40:39