Proper Use; Technical Data - EINHELL GC-HH 5056 Instructions D'origine

•
Shoulder strap
•
Original operating instructions
•
Safety instructions

3. Proper use

This electric pole hedge trimmer is suitable for
cutting hedges, bushes and shrubs.
Caution! Do not use this equipment to cut grass.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Rated voltage: ........................ 230-240 V~ 50 Hz
Power consumption: ................................. 500 W
Cutter bar length: ................................... 560 mm
Max. cutting length: ................................ 470 mm
Tooth spacing: .......................................... 20 mm
Cuts/min: .................................................... 3000
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841-1.
L sound pressure level ..................... 82.8 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
Measured sound power level L
K uncertainty ........................................ 3.76 dB
WA
Guaranteed sound power level L
Wear hearing protection.
Noise can cause loss of hearing.
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 62841-1.
Anl_GC_HH_5056_SPK13.indb 16 Anl_GC_HH_5056_SPK13.indb 16
GB
Handle under load
Handle (front)
Vibration emission value a
K uncertainty = 1.5 m/s
Handle (rear)
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
•
•
•
•
•
•
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
.... 101.5 dB(A)
WA
2. Damage to hearing if no suitable ear protec-
...... 105 dB(A)
WA
3. Health damage caused by hand-arm vib-
4. Health damage resulting from hand-arm vi-
- 16 -
= 4.749 m/s
h
2
= 3.715 m/s
h
2
Only use appliances which are in perfect wor-
king order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever ne-
cessary.
Switch the appliance off when it is not in use.
Wear protective gloves.
mask is used.
tion is used.
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
brations if the equipment is used over a long
period of time or if it is not properly guided
and serviced.
2
2
24.10.2022 12:53:18 24.10.2022 12:53:18