Installation; Square (Insert); Square Wall; Square Free - WANDERS Square 40 G Mode D'emploi Et Instructions D'installation

Installation

Square (insert)

WANDERS recommends adding extra air inlets with all built-in stoves.
To install the insert model of the Square one needs to remove the 4 attached
strips on each corner.
• To remove the strips please unscrew the three screws which hold the strip
to the stove (4 strips = 12 screws in total).
• Remove the strips
• Place the screws back in their initial position on the stove.

Square Wall

Let a piece of gas pipe (Ø 12 mm) come from the wall. Attach the provided flexible tube to the gas pipe. Then
mount the suspension bracket and the hearth as shown in the illustration below. Please read the rest of this
chapter for making the connection to the gas pipe. The technical illustration of the suspension bracket is given
on page 60.

Square Free

Let a piece of gas pipe (Ø 12 mm) come from the wall. Attach the provided flexible tube to the gas pipe. Then
fit the base to the hearth with the 4 screw bolts and push the whole unit towards the gas tube. Please read the
rest of this chapter for making the connection to the gas pipe.
27