Connecting To A Door Opener Or Electronic Lock; Connecting To A Motorised Entrance Gate; Connecting An Extra Camera (Option); User Guide - Extel LEVO Guide D'installation Et D'utilisation

Important :
• For the wiring diagram, please consult the label on the back of the monitor and the back of the station.
b. Connecting to a door opener or electronic lock
Connect directly to terminals 5 and 6 on the back of the station (no polarity to respect).
Note that this function is only valid if the screen is switched on. A humming sound may be heard when the con-
trol is used.
Important : The door opener or electronic lock you are about to install must have a mechanical memory like all
EXTEL references. For the wiring, please consult the label on the back of the station.
c. Connecting to a motorised entrance gate
Connect directly to terminals 3 and 4 on the back of the station. The outside station delivers a "dry" contact with
no current, to be connected to the "push button control" of your automatic opener.
Note that this function is only valid if the screen is switched on. A humming sound may be heard when the con-
trol is used.
d. Connecting an extra camera
Use the following wires:
• 2 6 /10 th wires up to 25 m
• 2 1.5 mm² wires from 25 to 100 m
1. Connect the wires following the wiring diagram (fig. 6).
2. When connecting the camera there is no need to respect polarity.
3. The outside station and camera wires must be connected together.

6. USER GUIDE

a. General
Brush the screen to turn it on
When the monitor is powered on, the home screen is displayed.
1. Date in the mm-dd-year format
2. Time
3. "Videophone" tab
4. "Recorded visitor" tab
5. "Settings" tab
1
The SD card must be inserted when the monitor is switched off in order to be taken into account
2
CFI EXTEL LEVO - 10/2015
3
4
5
GB4