Connecting An Electric Latch Or Lock; Using The Videophone; Controls On The Videophone; Technical Specifications - Extel LUKA Guide D'installation Et D'utilisation

b. Connecting an electric latch or lock
Note that this function is only available when the screen is displaying the video from out-
side.
Important: The strike plate or electric lock that you are about to install must have a mechanical memory, like
all EXTEL products. For wiring, see the label on the back of the camera.
c. Connecting a gate motor
-
Note that this function is only available when the screen is displaying the video from out-
side.
6. USING
a. Using the videophone
button to talk.
Note: The button only needs pressing once to communicate with the street unit.
button
to turn the monitor off.
To prolong the image a further 60 seconds, press the button.
The latch or lock is activated when the button is pressed.
To activate an automatic control, press the button.
It should be noted that the opening functions are only valid when the screen is switched on.
The image disappears briefly when the command is transmitted.
b. Controls on the videophone
4 controls are located on the side of the monitor:

7. TECHNICAL SPECIFICATIONS

a. Monitor a. Monitor
CFI EXTEL LUKA / MIKA - 12/2014
GB4