Hach TitraLab AT1000 Série Manuel D'utilisation De Base page 23

Error/Warning
Out of range
Electrode calibration has expired
Titrant calibration has expired
Maximum number of applications is reached
Requires at least one titrant that cannot be
installed
Requires too many titrants for this instrument
model configuration
Buffer unstable
The connected electrode(s) cannot be
calibrated or there is no application that
contains calibration parameters!
Standard unstable
Same buffer
Calibration solution already used
No titrant information
No measure received
Burette fails to deliver
Burette fails to fill
Burette failed to read delivered volume
Description
The computed result is outside accepted limits
The Calibration date has expired
The Calibration date has expired
The maximum number of applications per line has been
reached
The application is not compatible with applications already
installed as it uses a different titration
The instrument hardware configuration is not compatible with
this application
The value of the buffer is unstable
The type of sensor cannot be calibrated (e.g., PtPt, ORP, etc.)
or there is no installed application that contains calibration
parameters
The standard is unstable
The buffer has already been used
The calibration solution has already been used
System failure. Contact technical support
System failure. Contact technical support
The syringe cannot be emptied
The syringe cannot be filled
System failure. Contact technical support
English 23