Hach TitraLab AT1000 Série Manuel D'utilisation De Base page 12
Masquer les pouces
Voir aussi pour TitraLab AT1000 Série:
- Manuel d'utilisation de base (446 pages) ,
- Manuel d'utilisation simplifié (188 pages) ,
- Manuel de l'utilisateur (84 pages)
Publicité
Les langues disponibles
Les langues disponibles
Refer to the illustrated steps that follow.
Install the sensor
Install the legacy adapter
Go to
Connect the sensor
on page 13 if no legacy adapter is included in the application kit.
1. Connect the measuring, reference and temperature sensors to the legacy adapter.
2. Connect the legacy adapter cable to a sensor socket on the rear panel of the instrument. Refer to
Figure
5.
Figure 5 Install the legacy adapter
1 Temperature sensor
2 Reference sensor
3 Measuring sensor
12 English
Publicité
