Ammann ATR 30 Traduction Du Mode D'emploi Original page 57

7.1.3 Screw con nec tions
With vi brat ing de vices, it is im por tant to check in ter mit tently the
screw con nec tions for tight ness. Pay at ten tion to the tight en ing
torque.
7. Main te nance Ma chine
7.1.4 Check ing the rub ber buff ers
Check the rub ber buff ers (1) for tears and out breaks, as well as
for se cure fit. If they are dam aged, re place them im me di ately.
7.1.5 Check ing the bel lows
•
Check the bel lows (1) for con di tion and se cure fit.Re place de -
fec tive bel lows im me di ately.
•
Check mount ing clips (2) for se cure fit.
51