Bosch EXACT ION 6-1500 WK 18 V-LI Notice Originale page 16

OBJ_BUCH-2165-002.book Page 16 Tuesday, February 24, 2015 10:11 AM
16 | English
Technical Data
Industrial Cordless Angle Wrench EXACT ION
Article number 3 602 D94 ....
Rated voltage
Torque for hard/soft screwdriving application according
A)
to ISO 5393
A)
No-load speed n
0
Weight according to EPTA-Procedure 01/2003
Degree of protection
Battery (Not included in the standard delivery scope)
Permitted ambient temperature
– during charging
*
– during operation and during storage
Recommended batteries
– GBA 18 V... (Battery pack L) (0 602 494 002)
– GBA 18 V... (Battery pack XL) (0 602 494 004)
Recommended chargers
Angled drive head (Standard delivery scope)
Straight drive head (Standard delivery scope)
A)
measured with Bosch angled drive head
* Limited performance at temperatures <0 °C
Article number 0 607 ...
Torque for hard/soft screwdriving
application according to ISO 5393
Tightening torque at the flange
Weight according to EPTA-Procedure
01/2003
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-2.
Typically the A-weighted sound pressure level of the product
is 70 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-2:
Screwdriving without impact: a <2.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
1 609 92A 139 | (24.2.15)
6-1500 WK 8-1100 WK 12-700 WK 12-450 WK
... 406
V=
Nm
-1
min 525–1050
A)
kg
°C 0...+45
°C –20...+50
AL 18..
GAL 3680
Angled Angled
drive head drive head
1/4" 3/8"
... 453 617 ... 453 620
Nm 20
Nm 20
kg 0.2
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
2 2
, K=1.5 m/s .
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation
1194/2012), 2011/65/EU, until 19 April 2016:
2004/108/EC, from 20 April 2016 on: 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-2.
... 407 ... 408
18 18 18
2–8 2–11 2–16
375–750 250–500
1.5 1.5 1.5
IP 20 IP 20 IP 20
Li-Ion Li-Ion Li-Ion
0...+45 0...+45
–20...+50 –20...+50
  
– –
AL 18.. AL 18..
GAL 3680 GAL 3680
– –
– –
Angled Angled
drive head drive head
1/4" QC 1/4"
... 453 618 ... 453 630
20 20 20
20 20 20
0.2 0.2 0.2
... 409
18
2–16
160–320
1.5
IP 20
Li-Ion
0...+45
–20...+50

– –
AL 18..
GAL 3680
– –
– –
Straight
drive head
QC 1/4"
... 453 631
6
10
0.2
Bosch Power Tools