Installation - Hach PAT700 DS Manuel D'utilisation De Base

Figure 1 Instrument components
1 Wall mount bracket
2 PAT700
3 Tubing, 10 ft
4 Tubing, 5 ft

Installation

Installation guidelines
Fire hazard. This product is not designed for use with flammable liquids.
Electrocution hazard. If this equipment is used outdoors or in potentially wet locations, a Ground Fault
Circuit Interrupt (GFCI/GFI) device must be used for connecting the equipment to its main power
source.
Electrical shock hazard. Externally connected equipment must have an applicable country safety
standard assessment.
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
5 Power cord
6 Connector, I/O, 6-pin (1x)
7 USB flash drive
8 Graduated cylinder, 50-mL
D A N G E R
D A N G E R
W A R N I N G
W A R N I N G
9 Connector, I/O, 5-pin (3x)
10 Screwdriver, 2-mm wide blade
11 Stylus for touchscreen
12 Hex wrench, T-handle
English 7