Before Use - Hitachi DB 3DL Instructions De Sécurité Et Mode D'emploi

BEFORE USE

Check the work area to make sure that it is clear of debris and clutter.
Clear the area of unnecessary personnel. Ensure that lighting and ventilation is adequate.
OPERATION
How to make the batteries perform longer.
Recharge the batteries before they become completely exhausted.
When you feel that the power of the tool becomes weaker, stop using the tool and
recharge its battery. If you continue to use the tool and exhaust the electric current,
the battery may be damaged and its life will become shorter.
1. Installing the bit
Always follow the following procedure to install
driver bit. (Fig. 5)
(1) Pull the guide sleeve forward.
(2) Insert the bit into the hexagonal hole in the socket.
(3) Release the guide sleeve and it returns to its
original position.
CAUTION
If the guide sleeve does not return to its original
position, then the bit is not installed properly.
2. Removing the bit
Please do the opposite point on the method of
installing bit.
3. Automatic spindle-lock mechanism
When the main switch is off, the bit is locked in place, and the tool can be used as a
manual screwdriver.
4. Confirm that the battery is mounted correctly
5. Change rotation speed
Shift knob
Low speed
Fig. 6
Movement
Driver bit
Hexagonal hole
in the socket
Fig. 5
High speed
Fig. 7
English
Guide
sleeve
Shift knob
15