Accessories; Standard Accessories - Hitachi C 18DL Mode D'emploi

English
battery into the municipal waste stream. Check
with your local solid waste officials for details in
your area for recycling options or proper disposal.
7. Storage
Storing in a place below 104°F (40°C) and out of
the reach of children.
8. Service and repairs
All quality power tools will eventually require
servicing or replacement of parts because of wear
from normal use. To assure that only genuine
replacement parts must be used, all service and
repairs must be performed by a HITACHI
AUTHORIZED SERVICE CENTER, ONLY.
9. Service parts list
WARNING:
ALWAYS use Only authorized HITACHI replacement parts and accessories. Never use replacement parts or
accessories which are not intended for use with this tool. Contact HITACHI if you are not sure whether it is
safe to use a particular replacement part or accessory with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical
damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

1 Saw Blade (mounted on tool) .................................................... 1
C18DL
External Diam.
(2MRK)
6-1/2" (165 mm)
2 Box Wrench (Code No.940543) .................................................. 1
3 Guide (Code No.302756) ............................................................ 1
4 Battery (EBM1830) ...................................................................... 2
5 Battery Charger (UC18YRL) ....................................................... 1
6 Plastic Case ................................................................................. 1
18

ACCESSORIES

1
2
Hole Diam.
5/8" (15.9 mm)
CAUTION:
Repair, modification and inspection of Hitachi
Power Tools must be carried out by a HITACHI
AUTHORIZED SERVICE CENTER.
This Parts List will be helpful if presented with the
tool to the HITACHI AUTHORIZED SERVICE
CENTER when requesting repair or other
maintenance. In the operation and maintenance
of power tools, the safety regulations and
standards prescribed in each country must be
observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest
technological advancements.
Accordingly, some parts may be changed without
prior notice.
3
Code No.
317451
4
5
6