Assembly - Bosch R418009760–BDL–001–AA/2009-07 Mode D'emploi

62/220 Bosch Rexroth AG

Assembly

WARNING!
WARNING!
CAUTION!
Inverted tooth chain drive | R418009760–BDL–001–AA/2009-07
5 Assembly
Danger to property and injuries if system-specific limits
are not complied with!
Installation of the inverted tooth chain drive into the system may
be limited by the system's operating conditions.
X
In any case, observe the information in the system
documentation as well.
X
Before installation, contact the system manufacturer or
Bosch Rexroth AG, Antriebstechnik Zahnkette to clarify any
contradictions or questions.
Danger of crushing!
Working on the inverted tooth chain drive while the system is
running can cause major injuries from moving machinery.
X
Switch off the system, wait until all moving machine parts are
motionless, and prevent the system from switching on again.
X
Let the inverted tooth chain drive cool down to room
temperature.
X
Secure the sprockets to prevent them from turning
inadvertently.
Moving inverted tooth chains can cause crushing due to their
weight.
X
Before opening the chain, secure both ends of the section to
be opened so that they do not move inadvertently.
Skin irritation from corrosion protection oil and
lubricants!
The inverted tooth chain drive's corrosion protection oil and
lubricants can cause skin irritation.
X
Wear appropriate protective gloves and protective clothing.