Steam Ironing - SilverCrest SDB 2400 F4 Mode D'emploi

2) Check the care instructions on the labels in garments to see if they are suitable
for being ironed, and at which temperature setting.
Temperature regulator
3) Select the appropriate temperature setting with the temperature regulator 8.
NOTE
Always place the iron on the base 0 while it heats up. If you place the
►
iron on the sole of the iron q and do not move it, the automatic switch-off
will be activated after 30 seconds (see section Automatic switch-off)
and the appliance stops heating up.
■ The temperature control lamp
been reached, the temperature control lamp
4) Wait until the temperature control lamp
■ To moisten the laundry, press the spray button
■ This function is suitable for very dry and very crumpled garments.

Steam ironing

1) Set the steam control 3 to the desired steam setting
( = no steam,
2) The temperature regulator 8 must be set to at least the
Otherwise no steam will be produced.
■ 8 │ GB │ IE
symbol 8
= maximum steam).
Material type
Synthetics
Silk, wool
Cotton, linen
7 lights up. When the set temperature has
7 goes out.
7 goes out.
5.
setting.
SDB 2400 F4