Operating Elements; Before First Use - SilverCrest SDB 2400 F4 Mode D'emploi

Operating elements

1 Water jet
2 Filler opening for the water tank
3 Steam control
4 Steam blast button
5 Spray button
6 Control lamp for the automatic switch-off
7 Temperature control lamp
8 Temperature regulator
9 Power cable with anti-kink protection
0 Base
q Sole of the iron
w SELF-CLEAN button
e Measuring beaker
Before first use
1) Remove the steam iron from the packaging.
RISK OF SUFFOCATION!
► Plastic bags may pose a risk. To avoid the risks of asphyxiation, keep
plastic bags out of the reach of toddlers and small children.
2) Fill the water tank with water (See the section Filling the water tank).
3) Insert the plug into a mains power socket supplying an electrical current as
detailed on the rating plate.
4) Move the temperature regulator 8 to the "MAX
5) Heat the steam iron up for several minutes at the highest setting.
6) Activate the steam blast button
out of the sole of the iron q.
7) Then iron over a piece of old piece of material to remove any residues that
may remain on the sole of the iron q.
■ 6 │ GB │ IE
" position.
4 a couple of times so that steam comes
SDB 2400 F4