Operating Elements And Connections - IMG STAGELINE LSX-300TEXT Mode D'emploi

Laser Unit for Text Projection
Please read these operating instructions
carefully prior to operating the unit and keep
them for later reference. All operating ele-
ments and connections described can be
found on the fold-out page 3.
The laser unit is easy to use and is
designed for event organisers of any type of
event. However, a laser safety adviser must
be present while the laser unit is being oper-
ated ( chapter 2.1). Please contact your
laser safety adviser in case of any questions.
Contents
1 Operating Elements
and Connections . . . . . . . . . . . . . . . 12
2 Safety Notes . . . . . . . . . . . . . . . . . . 13
2.1 Special notes for laser units . . . . . . . 13
2.2 General safety notes . . . . . . . . . . . . . 13
3 Applications . . . . . . . . . . . . . . . . . . . 13
4 Installing / Setting into Operation . . 13
5 Operation . . . . . . . . . . . . . . . . . . . . . 14
5.1 Entering text with the keyboard . . . . . 14
5.2 Operating the unit with the keyboard 15
5.2.1 TEXT mode . . . . . . . . . . . . . . . . . . 15
5.2.2 AUTO mode . . . . . . . . . . . . . . . . . . 16
5.2.3 MUSIC mode . . . . . . . . . . . . . . . . . 16
5.2.4 CLOCK mode . . . . . . . . . . . . . . . . . 16
5.2.5 COUNTDOWN mode . . . . . . . . . . . 16
5.3 Operation with the remote control . . . 17
5.3.1 Replacing the battery . . . . . . . . . . . 17
5.3.2 Function options . . . . . . . . . . . . . . 17
5.4 Operation at the unit . . . . . . . . . . . . . 18
5.5 Recharging the clock battery . . . . . . 18
6 Specifications . . . . . . . . . . . . . . . . . 19
12
1 Operating Elements
and Connections
1 Reset button, can be activated by means
of an electrically non-conductive object
(e. g. small plastic pin)
2 Button MODE:
To select the operating mode, briefly
press the button:
- text mode
- show mode (all topics)
- show mode (one topic)
- music-controlled run
- time (and date)
The colour of the LED (7) indicates the
mode selected.
To switch the unit off, keep the button
pressed for 2 seconds; to switch it on
again, briefly press the button.
3 Microphone for music-controlled change
of graphics
4 Laser beam outlet
5 Setscrews for the mounting brackets
6 Brackets for setting up and mounting the
laser unit
7 LED to indicate the operating mode
purple = text mode
red = show mode (all topics)
red, flashing = show mode (one topic)
blue = music-controlled run
purple-red, alternating = time
blue-purple, alternating = countdown
8 IR sensor for remote control
9 Remote control (
10 Key switch LOCK to switch off the laser
beams
(to protect the unit against unauthorized
operation)
11 Air vents for the cooling fan
12 Jack 12DC to connect the power supply
unit provided
13 Jack PS2 to connect the keyboard by
means of the adapter provided (16)
14 Control SFZ to adjust the size of the text
projected (use a thin screwdriver)
15 USB plug of the keyboard
16 Adapter to connect the keyboard to the
jack PS2
chapter 5.3)