Auto Mode; Music Mode; Clock Mode; Countdown Mode - IMG STAGELINE LSX-300TEXT Mode D'emploi

5.2.2 AUTO mode

To select a specific topic, press the corre-
sponding numeric key:
Key Topic
1 New Year
2 Christmas
3 Love
4 Birthday
5 Party
6 Halloween
7 Music
8 Geometric shapes
9 Rectangle with waveform movements
0 All topics one after the other
‘
Topics for the AUTO mode
Additional functions:
Pause = pause / continue
Mirror = mirror:
Esc
= go to the beginning of the run

5.2.3 MUSIC mode

In this mode, music picked up by the micro-
phone (3) or other sound events of sufficient
volume will control the graphics run. The LED
(7) will briefly light up in blue for each sound
event controlling the graphics run. If no sound
event is received within 10 seconds, the laser
beam will be switched off and the LED will
constantly light up in blue. The laser beam will
be switched on again by the next sound event
of sufficient volume.
Use the numeric keys to select the topics
(as you do in the AUTO mode). The MUSIC
mode provides the same additional functions
as the AUTO MODE (
Use the remote control to adjust the
microphone sensitivity (refer to chapter 5.3.2,
fig. 8, key MUSIC).

5.2.4 CLOCK mode

1. The time can be indicated on its own or
alternately with the year date and the
month . day. To go from one indication type
to the other, briefly press the space bar.
2. For a mirrored indication, press the key
Mirror (repeatedly):
16
/ / /
chapter 5.2.2).
/ / /
To set the date and time:
1) Press the Enter key. The units digit and
the tens digit of the year date start flashing.
2) Use the numeric keys to enter the year
date, or correct it by means of the arrow
keys and .
3) Use the arrow key
date, and then enter or correct it.
4) Repeat this procedure to set the day, the
hour and the minute. To return to a previ-
ous setting option, press the arrow key
5) Go to the indication 12R or 24R and then
use the key or to select the 12-hour indi-
cation or the 24-hour indication.
6) To save the settings and to exit the setting
mode, press the Enter key, or to cancel
the setting process, press the key

5.2.5 COUNTDOWN mode

In this mode, seconds will be indicated,
running backwards. When the countdown
reaches zero, the laser beam will be switched
off.
1) Press the Enter key to enter the count-
down time. The current countdown time (in
seconds) starts flashing.
2) If required, use the key Backspace
delete the current countdown time, and
then use the numeric keys to enter the
time desired (9999 seconds max.).
3) Use the Enter key to confirm. The count-
down time stops flashing.
4) Use the space bar to start the countdown.
5) To pause or continue a countdown, use the
space bar or the key
6) Use the key Esc to retrieve the current
countdown time at any time. To restart the
countdown, press the space bar.
7) As with the other modes, the key
can be used to mirror the projection.
to go to the month
.
Esc .
to
Pause .
Mirror