Publicité
HP800S, Starting the motor: Fig. 3.5, 3.6, 3.7, 3.8
1
Close the choke (but leave it open if the motor is
already warm)
2
Move the gas lever to the starting position
3
Set the start switch to "on"
4
Pull the starter cord strongly
5
Motor is running – slowly open the choke
6
Move the gas lever to the working position
7
Plate compactor will begin to function
Stopping the motor
1
Set the gas lever to slow.
2
Switch machine to OFF.
Operating the vibratory plate
Attention: Wear safety shoes in order to avoid injuries.
• Before putting the machine into operation it is im-
portant to study and observe the safety instructions.
• Observe the national regulations for working when us-
ing the vibratory plate on public ground or roads.
• Keep persons, children and animals away from the
dangerous area.
• Search the working area for foreign bodies and re-
move them.
• When leaving the vibratory plate, always shut down
the motor.
-
-
-
-
-
25
Publicité
