Mechanical Installation; Mechanischer Aufbau; Installation Mécanique; Mekanisk Montering - Hedson IRT 4-20 PCAUTO Manuel D'installation

3.2
GB - Suspended on a wall
DE - Aufhängung an einer Wand
FR - Suspendu au mur
SE - Upphängning på en vägg
IT - Sospeso a parete
ES - Suspendido en el muro
-
CN
吊装 壁挂
SK - Zavesené na stene
4. GB - Mechanical installation
DE - Mechanischer Aufbau
FR - Installation mécanique
SE - Mekanisk montering
IT - Installazione meccanica
ES - Instalación mecánica
CN -
机械安装
SK - Mechanická inštalácia
4.1
GB - Installing side rails
PLEASE NOTE!
As the profile is not symmetrical, the side rail must be
directed to the work surface as illustrated in the figure.
The recommended number of mounting elements for
the side rails is one for each 1.5 m – rounded upwards.
Provide suspension points every 1.5 m. Maximum
distance between 2 suspension points is 3.5 m.
Available clamp length for the suspension bolts is up to
10 mm. Check the final assembly of the side rails making
sure they are parallel (± 3 mm).
6
GB - Power input
DE - Leistungsaufnahme
FR - Alimentation generale
SE - Ströminmatning
IT - Ingresso dell'alimentazione
ES - Entrada de la alimentación
- 电源输入
CN
SK - Vstup napájania
713683 rev 8