Parameter Adjustment - ECOFOREST ecoSMART e-manager Manuel D'utilisation

5.7. Parameter adjustment

Take the following steps to change a parameter:
1. Search for the screen containing the parameter that needs adjusting (see Section 0).
2. With the cursor in position 1 press on
3. Adjust the parameter in position 2 with buttons
4. Press to accept and move the cursor to position 3.
5. Adjust the parameter in position 3 with buttons
6. Press to accept and move the cursor to position 4.
7. Adjust the parameter in position 4 with buttons
8. Press to accept and return to position 1.
9. With the cursor in position 1 again, press buttons
user menus.
Position 1
Figure 5.3. Browsing through the list of user menus.
to enter the screen and move the cursor to the parameter in position 2.
.
.
.
to go to the previous or next screen, or
Figure 5.4. Parameter adjustment.
54
ecoSMART e-source
user, installer and technical service manual
XXXXXX
XXXXXX
XXXXXX
to return to the list of
Position 2
Position 3
Position 4