Operating Modes; Status; List Of User Menus - ECOFOREST ecoSMART e-manager Manuel D'utilisation

Main brine pump activated
Geothermal source activated (source 1)
Aerothermal source activated (source 2)
Wait. The unit is initialising
STAND
The unit is on and awaiting the activated command
-BY

5.4. Operating modes

This field shows icons that indicate the current operating mode of the e-source.
Brine sources in operation. It also indicates the brine source collector inlet and outlet temperatures.
Wait. The unit is initialising.
STAND-BY
The unit is on and awaiting the activated command.

5.5. Status

This indicates e-source availability to service the various heat pump functions.
ON status
The e-source is on as commanded by the heat pump or cascade of heat pumps.
OFF status
The e-source is off as commanded by the heat pump or cascade of heat pumps.

5.6. List of user menus

Follow the instructions below to browse through the various user menu screens. Each menu has a series of screens that are used to
adjust parameters and view desired information.
ecoSMART e-source
user, installer and technical service manual
53