Technical Specifications; Technical Data Table - ECOFOREST ecoSMART e-manager Manuel D'utilisation

9. Technical specifications

9.1. Technical data table

Table 9.1 shows the main technical specifications of the e-source manager.
Specification
Geothermal and/or aerothermal brine sources together with the ecoGEO HP range
Application
Place of installation
Type of power supply
Maximum recommended external protection
Electrical data
Primary transformer circuit fuse
Secondary transformer circuit fuse
Dimensions Height x Width x Depth
Weight Empty weight (without assembly)
Communication fault
The e-source manager has no pLAN communication with the other elements of the pLAN
network. This alarm locks the system.
No available sources
There are no available sources because all configured sources are out of range (see section
0) or there is an alarm caused by an external digital input (see section 0). This alarm locks
the system.
Sources not configured
There are no configured sources. This alarm locks the system.
Source X unavailable
Source X is not available due to an external alarm in the digital input DI of the source (see
section 0).
Temperature probe
Alarm due to broken or disconnected temperature probe. Depending on the probe causing
the alarm, this may lock the system.
Table 9.1. Table of technical specifications of the e-source manager
ecoSMART e-source
user, installer and technical service manual
unit
ecoSMART e-source
s
V 1/N/PE 230V, 50Hz
A Magnetic, thermal and differential 1A
A
A
mm
kg
65
Indoors
0.5
2.5
600x400x158
15