Information Menu (Installer); Manual Activation Of Components; Default Values - ECOFOREST ecoSMART e-manager Manuel D'utilisation

6.6. Information Menu (installer)

6.7. Manual activation of components

6.8. Default values

Brine system
Shows the operating status of the main brine pump. Also shows the brine collector inlet
and outlet temperature as well as the difference between them (DT).
Geothermal or aerothermal source 1, 2, 3 and 4
1. Shows the regulation % of the source:
C. GEOTHERMAL: Shows the pump speed in %.
D. AEROTHERMAL: Shows the fan speed in %.
2. Only for aerothermal sources. Shows the actual DT value (outdoor air temp. –
collector outlet glycol temp.) and the configured value to start defrosting.
3. Shows the source outlet temperature and the difference with the brine collector inlet
temperature.
Version
This shows information about the application installed in the controller.
XXXXXX
1. Used to manually activate the different components controlled by the e-source.
2. For components with modulating control, used to adjust different regulation values
manually.
Initialization
Used to delete the settings in the USER and INSTALLER menus and restore default factory
settings.
60
ecoSMART e-source
user, installer and technical service manual