Parameter Adjustment; On/Off Menu; Schedule Menu - ECOFOREST ecoSMART e-manager Manuel D'utilisation

3.7.

Parameter adjustment

Take the following steps to change a parameter:
1. Search for the screen containing the parameter that needs adjusting (figure 3.4).
2. With the cursor in position 1 press on
3. Adjust the parameter in position 2 using buttons
4. Press to accept and move the cursor to position 3.
5. Adjust the parameter in position 3 with buttons
6. Press to accept and return to position 1.
7. With the cursor in position 1 again, press buttons
user menus.
Position 1
3.8.

ON/OFF Menu

4:5 Ue me /8
O/Off
te d h
Spl ctl
/8 O/Off
Uit dde:
Stte:
3.9.

SCHEDULE Menu

4:5 Ue me /8
O/Off
te d h
Spl ctl
/8 te/H
y: dy
te: //5
H:
to enter the screen and move the cursor to the parameter in position 2.
HW et
Eble:
SetT:
Figure 3.4. Adjusting comfort parameters.
On/Off

Shows the unit address.
Used to switch the energy manager on / off or to activate the EMERGENCY status.
Date/Time
This is used to adjust the day of the week, date (DD/MM/YY) and time (HH:MM 24-hour
format) of the controller.
7:5
User manual ecoSMART e-manager
.
.
to go to the previous or next screen, or

29
to return to the list of
Position 2
Position 3