Sony UP-897MD Mode D'emploi page 51

Symptom Causes/remedies
The unit stops printing When printing almost black images
while printing almost continuously, the thermal head
black images and the protection circuit may shut down the
message "COOL" is unit to prevent the thermal head from
displayed on the LCD. overheating.
tStop printing and allow the thermal
head to cool.
White lines or small Is "CO:ON" selected in the "COLOR"
letters on the screen menu item for black and white input
are not printed clearly. signals?
tSelect "CO:OFF" in "COLOR"
when the input signal is a black and
white signal. (page 37)
Small squares appear Is "CO:OFF" selected in the
over the whole screen. "COLOR" menu item for color input
signals?
Select "CO:ON" in "COLOR" when
the input signal is a color signal.
(page 37)
• Is the 75 Ω select switch set
The printout is too
dark or too light. correctly? (page 33)
• Is the "MEDIA" menu item set
correctly? (page 38)
• Is the "GAMMA" menu item set
correctly? (page 37)
The printout seems Is "AS:1:1" selected in the "ASPCT"
stretched or enlarged. menu item?
tSelect "AS:4:3." (page 37)
Error Messages
Messages appear on the LCD under the following
conditions. Take the remedial actions shown next to the
messages to correct the problem.
Messages Description and remedy
DOOR The paper door is open.
tClose the paper door until it is
locked securely.
EMPTY • There is no paper loaded.
• Paper has been used up.
tLoad some paper. (page 34)
COOL The protection circuit that prevents the
thermal head from overheating has
been activated.
tWait for the message to disappear.
Printing will then resume
automatically.
LOCK The menu operation function is locked.
The jog dial, CONTR control and
BRIGHT control are disabled.
tIf you want to perform menu
operations or use those controls,
contact the nearest authorized
dealer.
51
Error Messages