Sawing - AL-KO BKS 4540 Traduction Du Mode D'emploi Original

en

SAWING

40
CHAIN BRAKE
The chain brake is a device which stops the chain instantaneously if the
chain saw recoils due to kickback.
Normally, the brake is activated automatically by inertial force. It can
also be activated manually by pushing the brake lever (Front handle
guard) down toward the front. When the brake operates, a white cone
pops up from the base of the brake lever. (1) Front handle (2) Release
(3) Brake (4) Front handle guard
To release brake, pull up the front handle guard toward the front handle
till "click" sound is heard.
WARNING!
When the brake operates, release the throttle lever to slow down
the engine speed. Continuous operation with the brake engaged
will generate heat from the clutch and may cause trouble.
Be sure to confirm brake operation on the daily inspection.
How to confirm:
1) Turn off the engine.
2) Holding the chain saw horizontally, release your hand from the front
handle, hit the tip of the guide bar to a stump or a piece of wood, and
confirm brake operation. Operating level varies by bar size. In case the
brake is not effective, ask our dealer inspection and repairing.
STOPPING ENGINE
1 Release the throttle trigger to allow the engine idling for a few minu-
tes.
2 Move the switch lever downward.
(1) Engine switch
WARNING!
Before proceeding to your job, read "For Safe Operation" section
it is recommended to first practice sawing easy logs. This also
helps you get accustomed to your unit.
Always follow all the safety regulations which can restrict the use of the
machine.
Always follow the safety regulations. The chain saw must only be used
for cutting wood. It is forbidden to cut other types of material. Vibrations
and kickback vary with different materials and the requirements of the
safety regulations would not be respected. Do not use the chain saw
as a lever for lifting, moving or splitting objects. Do not lock it over fixed
stands. It is forbidden to hitch tools or applications to the P.T.O. that are
not specified by the manufacturer.
Sawing
BKS 4540