Menu "Installation Settings - Mennekes AMTRON Xtra Guide D'installation

AMTRON Rated Maximum charging current
Current
AMTRON Serial Serial number of the device
Number
AMTRON Order Article number of the device
Number
AMTRON „ yes: Internal temperature sensor
Temperature
Sensor Installed „ no: Internal temperature sensor
AMTRON Local „ yes: Internal RCD and MCB
Fuses Installed
„ no: Internal RCD and MCB not
AMTRON „ yes: "Production Settings" read-
Production Settings
Write Enabled „ no: "Production Settings" edit-
HCC3 Ethernet MAC address of the LAN interface
MAC Address of the HCC 3
HCC3 Total Energy Sum of the charged energy
[Wh]

6.4.2 Menu "Installation Settings"

The menu "Installation Settings" can be used for the com-
missioning settings.
f Make adjustments taking into account the installation.
Î "5.3 On-site installation"
Installation Data
VALUE Description
AMTRON Input: Maximum charging current in A
Installation
Current
Energy Manager  Do not use Energy Manager
Present  Use Energy Manager
f If an Energy Manager is to be
used, additionally select the
desired Energy Manager in
"Energy Manager Configuration".
22
available
not available
available
available
only
able
External  No external tariff-switching signal
Tariff Switch available
Connected  External tariff-switching signal
available
Operating manual AMTRON

Xtra (E/R), Premium (E/R/W) "5.1
Functional description of the oper-
ating modes"
Monitoring Relay  Monitoring of all three phases (for
Wired to 1 Phase devices operated in three phases)
Only  Monitoring of one phase (for
devices operated in single phase)
Information on "AMTRON Installation Current"
Devices with 3.7 kW charging power without miniature cir-
cuit breaker can be configured to 7.4 kW charging power.
f Set the "AMTRON Installation Current" field to 32 A.
T
T
DANGER
Fire hazard due to device overload.
The is a fire hazard due to overloading of the device
caused by unsuitable circuit breaker and supply line.
f Route the supply line and the circuit breaker according
to the technical data of the device.
Î "5.3 On-site installation"
Charging with 7.4 kW charging power is only pos-
sible with a charging cable designed for 32 A.