Heating Management; Heating Power; Ambient Thermostat; Radio Remote Control - Bio Bronpi CAROL-MIXTA Instructions D'installation, D'utilisation Et D'entretien

12.4.2.

HEATING MANAGEMENT

Inside this menu it is possible to modify the heating mode, according to the next submenu:
12.4.2.1.

HEATING POWER

Inside this submenu you can modify the heating power. It is possible to
choose automatic or manual mode; in the first case is the system which
choose the combustion power, in the second case is the user who choose
the desired power.
On the right side of the display is shown the heating mode (A = automatic,
M = manual) and power relative.
Remember that if you choose a low power it is very probably that your
ambient doesn't reach the desired temperature or set in the thermostat.
12.4.2.2.

AMBIENT THERMOSTAT

Inside this submenu you can modify the main thermostat. It means, we
modify the desired set-point temperature.
12.4.3.

RADIO REMOTE CONTROL

Useless submenu, because this stove has no remote control.
13.4.4.

CHRONO

Submenu to choose the programming mode and the time sections to switch on and of the stove.
IMPORTANT NOTE. Before programming the stove, check that the date and the time of the stove are correct. On the
contrary, the programme will be activated according to the time and date fixed and it may not satisfy your needs.
12.4.4.1.

MODE

In this submenu, it is possible to choose daily, weekly or weekend programme or disable the programming of the stove. You can only choose
1 of 3 options (daily, weekly or week-end), you cannot choose two or more combinations. Pressing button P2 you can enable or disable the
programming. In order to select an option, it is necessary to use the button P4 and P5 and confirm the option selected through the button P3.
In this submenu, you don't select time intervals. You simply choose the type of programme that you are interested in, according to:
- Daily programme: there are three possible times for igniting or turning off the stove for each day of the week: Monday, Tuesday,
Wednesday, Thursday, Friday, Saturday and Sunday.
- Weekly programme: there are three possible times for igniting or
turning off the stove for the 7 days of the week, that is, from Monday
to Sunday there are three possible times for ignition and three
possible times for turn off but this will be applied for the 7 days of
the week.
- Weekend programme: there are 3 possible times for igniting or
turning off the stove for Monday, Tuesday, Wednesday, Thursday
and Friday. And other 3 different times for igniting or turning off the
stove, only for Saturday and Sunday.
When a programme is selected, the display will show the symbol of a clock and, next to the clock, a letter D (daily), W (week) or WE
(weekend) according to the following drawing:
Note that until now you only have chosen enable or disable a programming,
and choose the desired programming mode but in order to establish the on
and off times it should be done through the submenu "Programme" described
below:
12.4.4.2.

PROGRAMME

In this submenu it is possible to choose the different working hours among
the 3 possibilities of programming: daily, weekly or week end. You can go into the modification mode of any time interval by pressing button
P3, and choose the desired time with buttons P4 and P5 and save the programming pressing again button P3.
In this submenu, you have to choose the time for igniting and turning off the stove. You can choose one, two or even three time intervals. To
activate any time and thus the stove obeys this time section, you must press button P2 to activate the black led at the left of the start hour.
• DAILY PROGRAMME: in this option, we can select the day of the week and the time we want the stove to be ignited and turned off.
For each day, there are 3 possibilities. The time is introduced by pressing button P3, choose de desired time with buttons P4 and P5
and save the programming with button P3, you will be able to set the time by increasing or decreasing it in fractions of 15 minutes. To
activate the time section you must press P2 to activate the black led at the left of the start hour.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Heating power
Power:4
Ambient thermostat
Max: 40
Set: 23
Min: 10
Mode
Enable
Daily
Weekly
Week-end
11:30
30º
20º
Stop
37 CAROL-MIXTA