Making Changes With Function Mode; Switching The Function Mode; Setting Station Name/Disc Title (Station Name/Title) - Fujitsu Ten Eclipse CD7000 Manuel D'utilisation

Various Settings

Making changes with Function Mode

A variety of settings can be changed.

Switching the Function Mode

Press the [CUSTOM] button for
1
more than one second.
The Menu Selection mode is activated.
Press the [SELECT] (Upper/Lower)
2
button to select the FUNC.
The display adjustment mode is
activated.
3
Press the [ENTER] button.
The function mode is activated.
Press the [SELECT] (Upper/Lower)
4
button to select the setting item.
When the button is pressed, the
setting item changes in the following
order.
*1
l Station Name or Title
AreaShot
*3
l MS Format l Guide Tone l Clock
ON/OFF l Clock Adjust l Demo l
*4
l AUX Sensitivity
HD Radio
Sensitivity l Steering SW Data l
*6
l
SIRIUS ID
*1
AreaShot l MMM
*1: Refer to page 54 for details on
Area shot operation.
*2: Cannot make settings other than
for tuner or CD/CD changer
operation.
*3: This setting can only be chosen
when Memory Stick is inserted.
(Refer to page 36 on Memory Stick
operation.)
*4: This setting can only be chosen
when an optional HD radio tuner
unit is connected. (Refer to page
84
Setting station name/disc title
(Station Name/Title)
The name of the station being received, or the
title of the CD being played can be set.
*2
• No CD text disc can be set.
• Setting cannot be performed when an
optional HD radio tuner unit is connected,
or during SIRIUS satellite radio reception.
*5
l S/A
*7
l
AVL Setting
1
2
3
94 for details on HD Radio
operation.)
*5: Refer to page 101 for detail on
AUX operation.
*6: This setting can only be chosen
when an optional SIRIUS Satellite
radio tuner unit is connected.
(Refer to page 97 for details on
SIRIUS Satellite radio operation.)
*7: This setting can only be chosen
when an optional GPS unit is
connected. (Refer to page 59 for
details on Area Shot operation.)
ATTENTION
Press the [SELECT] (Upper/Lower)
button to select the Station Name
or Title.
Station Name or Title will be selected
based on the current audio mode
settings.
Press the [ENTER] button.
The title setting mode is activated.
Press the [SCREEN] button to
select the character type.
Pressing the button will switch types
from [ABC] (upper-case
characters) to, [123]
characters) and then [!"#] (symbols).
alphabet
(numeric