Making Changes With Function Mode - Fujitsu Ten ECLIPSE CD1000 Manuel D'utilisation

Making changes with Function Mode

1
Press the [MODE] button for several seconds.
The mode will be switched to the function mode.
2
Pressing the [
Mode
DEMO
CLOCK H
CLOCK M
DIMMER
TEL
SCROLL
TAG DISP
AMP GAIN
AREA
3
Turn the control dial to select the setting.
4
Press the [MODE] button to exit the function mode.
] or [ ] button will switch the mode selection.
Function
DEMO mode setup
CLOCK adjust mode (hour)
CLOCK adjust mode (minute)
Dimmer mode change setup
TELE MUTE detect signal logic setup
TEXT title auto scroll style setup
TAG display setup
AMP.Gain change setup
Tuner Area change setup

Making changes with Function Mode

Control dial
Turn to the Right
ON
UP direction
UP direction
ON
➔
MUTING 1 MUTING 2
➔ ➔
ONCE AUTO
ON
HIGH PWR
see page 18
Turn to the Left
OFF
DOWN direction
DOWN direction
OFF
➔
OFF
OFF
OFF
VIII
LOW PWR
23
VII