Turning The Power On And Off - Fujitsu Ten ECLIPSE CD1000 Manuel D'utilisation

Introduction

Turning the power on and off

When the power is turned ON, the last source
mode used (such as CD or tuner) prior to turning
OFF the power will be restored.
Press the [POWER] button until the
1
power is turned off.
Press the [POWER] button again to
2
turn the power on.
● MEMO ●
• When the power is off, pressing
the [SOURCE] button will turn
the power on.
• When the power is off, pressing
the [DISP] button will display
the clock for 5 seconds.
10