Listening To Cd - Fujitsu Ten Eclipse CD7000 Manuel D'utilisation

Operation

Listening to CD

Press the [
1
button.
The front panel opens.
If a disc has already been loaded, the
disc is ejected by pressing the [
(OPEN/EJECT)] button for less than
one second.
Insert a CD into the disc slot, label
2
side up.
Press the [
3
button to close the front panel.
The CD will immediately start playing.
ATTENTION
• Playback may be intermittent when there is
a scratch on a CD or when the recorded
side is dirty.
• When a CD is already loaded, press the
[SOURCE] button for less than one second
to switch to the CD mode. (For details, refer
to "Switching Audio Modes" on page 17.)
CAUTION
[
Do not press the
button while CD is being inserted. This
could cause an injury and damage to the
front panel.
26
●
• When music data recorded in
(OPEN/EJECT)]
• When a non-MP3/WMA file is
(OPEN/EJECT)]
• The
(OPEN/EJECT)
]
Note ●
the normal way (CD-DA) is
present on the same disc with
MP3/WMA music
normally recorded music data
will be played. To listen to the
MP3/WMA music files, press
[MODE] button for more than
one second.
played, "NO SUPPORT" will
appear.
optional CD
cannot be used to play MP3/
WMA files.
files, the
changer