Changing Spectrum Analyzer (S/A); Changing Slide Show On/Off (Slideshow); Gps Information Display - Fujitsu Ten Eclipse CD7000 Manuel D'utilisation

Various Settings
Changing spectrum analyzer
(S/A)
You can change the spectrum analyzer type.
Press the [SELECT] (Upper/Lower)
1
button to select the S/A.
2
Press the [ENTER] button.
The spectrum analyzer type setting
mode is activated.
Press the [SELECT] (Upper/Lower)
3
button to select the setting item.
When the button is pressed, the
analyzer type changes in the following
order.
Type 1 l Type 2
4
Press the [ENTER] button.
The selected settings will take effect.
Press the [CUSTOM] or [RTN]
5
button to exit display adjustment
mode.
Changing Slide Show ON/OFF
(Slideshow)
Slide Show can be switched ON or OFF. When
Slide Show is switched ON and "Slide Show" is
selected in the screen settings, the main unit will
display a series of previously-stored images (see
page 20).
Press the [SELECT] (Upper/Lower)
1
button to select the Slideshow.
2
Press the [ENTER] button.
The slide show setting mode is
activated.
Press the [SELECT] (Upper/Lower)
3
button to select the setting item.
When the button is pressed, the slide
show setting changes in the following
order.
80
Upper: ON
Lower: OFF
Press the [CUSTOM] or [RTN]
4
button to exit display adjustment
mode.

GPS information display

The following GPS information can be displayed
in addition to map information when an optional
GPS unit is connected:
• Directional heading
• GPS reception
• Latitude/longitude
• Compass
• Speed indicator display
Press the [SELECT] (Upper/Lower)
1
button to select GPS INFO then
press the [ENTER] button.
The GPS information setting mode is
activated.
Press the [SELECT] (Upper/Lower)
2
button to OFF, Type A, Type B or
Type C.
The following information is displayed
depending on the
selected:
OFF: No display
Type A: Directional
reception, compass
Type B: Latitude/longitude,
reception, compass
Type C: Speed
reception, compass
3
Press the [ENTER] button.
The selected settings will take effect.
Press the [CUSTOM] or [RTN]
4
button to exit display adjustment
mode.
display type
heading, GPS
GPS
indicator, GPS