Automatic Volume Adjustment - Fujitsu Ten Eclipse CD7000 Manuel D'utilisation

Various Settings

Automatic volume adjustment

The volume can be set to automatically adjust
based on vehicle speed information obtained
from the GPS.
Press the [SELECT] (Upper/Lower)
1
button to select AVL Setting then
press the [ENTER] button.
The AVL setting mode is activated.
Press the [SELECT] (Upper/Lower)
2
button to select AVL setting.
When [SELECT] button is pressed, the
AVL setting changes in the following
order and the
highlighted.
OFF l Low l Mid l Hi
Press the [CUSTOM] or [RTN]
3
button to exit function mode.
ATTENTION
• Volume adjustment may be a few seconds
late when vehicle speed is reduced.
• Sound volume may not always change in
accordance with vehicle speed on the
quality of GPS reception.
90
selected item is