Changing Scroll Pattern (Scroll Pattern) - Fujitsu Ten Eclipse CD7000 Manuel D'utilisation

• When data is imported from a CD-R, the
importing process will take a long time if a
lot of data other than the import data has
also been saved to the CD-R.
CAUTION
• Do not turn the ignition switch or power
to the main unit ON or OFF (or remove
the front panel of the main unit) while
data reading is in progress. Data
reading will be interrupted and data may
be damaged.
• Only the [VOL] button can be operated
while the system is reading data.
Changing scroll pattern (Scroll
Pattern)
The scroll pattern of the text display can be
switched.
Press the [SELECT] (Upper/Lower)
1
button to select the Scroll Pattern.
The selected item is highlighted.
2
Press the [ENTER] button.
The scroll pattern setting mode is
activated.
Press the [SELECT] (Upper/Lower)
3
button to select scroll pattern.
When the button is pressed, the scroll
pattern changes in the following order.
Once l Repeat
Once: Text will scroll once before
changing to a fixed display
Repeat: Text will continue to scroll
4
Press the [ENTER] button.
The selected settings will take effect.
Press the [CUSTOM] or [RTN]
5
button to exit display adjustment
mode.
Making changes with Display Adjustment Mode
XIII
83