Fujitsu Ten Eclipse CD7000 Manuel D'utilisation page 62

Various Settings
NON-F
Adjusts non-fader level (for
(NON-FADER
connected sub-woofer).
LEVEL)
SVC Setting examples:
The volume for the initial FM mode (default value: 40) is used as a reference for storing the differences
in volume that have been set for each audio mode.
Audio mode
Default value
(Volume level)
SVC setting
(Volume level)
When volume level in FM
mode is adjusted from 40 to
45
When volume level in CD
mode is adjusted from 35 to
60
When volume level in AM
mode is adjusted from 80 to
20
When volume level in Memory
Stick mode is adjusted from 10
to 35
*:The volume levels can be set to a maximum of 80 and a minimum of 0. If you try to go past the
maximum or minimum volume level, the level will not change. For the CD changer, SVC
adjusts the volume using the setting value for the CD player.
The volume difference can be set within a range of -10 to +20.
ATTENTION
If the battery terminals have been disconnected because of a reason such as vehicle maintenance,
the SVC settings will return to their default values. If this happens, you will need to make the
settings again.
62
Increase the Decrease the
sub-woofer sub-woofer
level. level.
FM AM
Reference 0
(40) (40)
SVC setting SVC setting
Reference
value
(40)
+15 (55) -10 (30)
55 o 60 30 o 35
45
45 o 70 60 o 80*
70 o 5 60 o 0*
20
5 o 30 20 o 45
- -
CD Memory Stick
0 0
(40) (40)
SVC setting
value value
+5 (45)
45 o 50
50 o 75
60
75 o 10
0 o 20 35