General Information; Scope Of Supply; Contact Addresses; Warranty - Burkert 2100 Instructions De Montage

Types 2100, 2101, 2103
GeneralInformation
4. GENERAL INFORMATION
4.1. Scope of Supply
Check immediately upon receipt of the delivery that the contents are
not damaged and that the type and scope agree with the delivery note
and packing list.
If there are any discrepancies, please contact us immediately.
4.2. Contact Addresses
Germany
Bürkert Fluid Control System
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
International
Contact addresses can be found on the final pages of the printed
instructions.
And also on the Internet at:
www.burkert.com Bürkert Company Locations
4.3.

Warranty

This document contains no promises of guarantee. Please refer to our
general terms of sales and delivery. The warranty is only valid if the
actuators and accessory parts are used as intended in accordance
with the specified application conditions.
The warranty extends only to defects in the process valves.
We accept no liability for any kind of collateral damage
which could occur due to failure or malfunction of the
device.
4.4. Product Designations and
Manufacturers
The following auxiliary materials are recommended for installation in
these instructions:
Type of Product
auxiliary designation
material
Sealer and Multi silicone grease
anti-seize OKS 1110
agents
Liquid LOCTITE 274
adhesive
Tab. 1: Auxiliary Materials
English
Manufacturer and
Internet address
OKS Schmierstoffe GMBH
www.oks-germany.com
Henkel Loctite Deutschland
GmbH
www.loctite.de
7