Option: Threaded Nipple; Actuator Size D (50) - Burkert 2100 Instructions De Montage

8. OPTION: THREADED NIPPLE
for inductive proximity switch
M12 x 1
Use the threaded nipple option for inductive proximity
switch M12 x 1 only with:
• Control function A
The threaded nipple option makes it possible to adapt an inductive
proximity switch M12 x 1 (for example Turck or Balluf) for flush instal-
lation on the actuator. This option records the upper end position of the
actuator. The target is the spindle extension (D). The proximity switch
is not included in the scope of supply.
8.1. Actuator size D (50)
8.1.1. Tasks before Installation
DANGER!
Risk of injury from high pressure!
• Before making alterations to the devices, switch off the pressure
and vent the lines.
→
Interrupt the flow of medium.
→
Switch off the pilot air.
→
Empty the valve body.
→
Unscrew the transparent cap Ⓐ from the actuator cover Ⓒ.
18
English
Types 2100, 2101, 2103
Option:ThreadedNipple
DANGER!
Risk of injury from high pressure!
Without the transparent cap, the actuator blows freely upward
when the pilot pressure is applied to the wrong connection.
• Apply the pilot pressure for control functions A and I only on
connection 1.
→
To remove the optical position indicator Ⓑ, move the actuator to
the upper end position:
Apply the pilot pressure to connection 1.
→
Unscrew the optical position indicator Ⓑ from the spindle
extension Ⓓ.
Fig. 9: Actuator D (50)
A Transparent cap
A
B Optical position indicator
C
C Actuator cover
B
D Spindle extension
D
1
Connection