Cherry KC 5000 Mode D'emploi page 5

Operating Manual
CHERRY KC 5000
Corded Keyboard
JK-0211
1 Connecting keyboard to the PC
 Connect the keyboard to the USB port of the PC/
notebook.
2 KeyM@n software
The 11 Hotkeys of the keyboard are freely
programmable with the KeyM@n software. Try it and
see!
You can download the current version from
www.cherry.de/english/service/download.php
3 Keyboard does not work
• Use another USB port on the PC/laptop.
• To make sure that the keyboard is not defective,
test it if possible with another PC/laptop.
• Set the option "USB Keyboard Support" or "USB
Legacy Mode" to enabled in the BIOS of the PC.
4 Tips
4.1 Cleaning
Caution!
Damage may be caused by harsh cleaning agents or
liquids in the keyboard
1 Do not use solutions such as gasoline or alcohol
and scouring agents or scouring sponges for
cleaning.
2 Prevent fluids from entering the devices.
3 Do not remove the keycaps of the keyboard.
1 Switch off the PC.
2 Clean the keyboard with a slightly damp cloth and
some mild cleaning agent
(e.g.: dishwashing liquid).
3 Dry off the devices with a soft, lint-free cloth.
4.2 RSI syndrome
RSI syndrome
RSI stands for "Repetitive Strain Injury". RSI arises
due to small movements continuously repeated over a
long period of time.
Typical symptoms are discomfort in the fingers or
neck. For further information see: www.cherry.de/
english/service/servicedownload_rsi.htm
1 Set up your workspace ergonomically.
2 Change the angle of the keyboard using the rear
supports.
3 Position the keyboard and mouse in such a man-
ner that your upper arms and wrists are out-
stretched and to the sides of your body.
4 Take several short breaks, with stretching exer-
cises if necessary.
5 Change your posture often.
4.3 Disposal
Dispose of the old unit via a collecting
point for electronic scrap or via your
dealer.
5 Technical data
Designation
Supply voltage
Current consumption
Storage temperature
Operating temperature
Value
5.0 V/DC ±5 % SELV
typ. 50 mA
–20 °C to +65 °C
0 °C to +40 °C
5